Description
Geekvape Z Subohm Tank 5 – Zeus Z5 Tank
The Geekvape Z Subohm Tank 5, also known as the Geekvape Zeus Sub Ohm Tank 5, is the latest generation of Geekvape’s popular Z Sub-Ohm Tank range. Designed for DTL (Direct To Lung) vaping, the Z Subohm Tank 5 combines Geekvape’s upgraded Z XM Boost Version coils with adjustable top airflow and a convenient top-fill system.
Built for flavour, vapour production and a more leak-resistant vaping experience, the Geekvape Z Tank 5 is an excellent choice for experienced DTL vapers looking for a reliable sub-ohm tank to pair with a suitable vape mod.
The UK TPD version has a 2ml e-liquid capacity and uses Geekvape ZXM Series coils, with a 0.2Ω coil pre-installed and a 0.4Ω replacement coil included.
Key Features
- Geekvape Z Subohm Tank 5
- Also known as the Geekvape Zeus Sub Ohm Tank 5
- Designed for DTL vaping
- 2ml UK TPD e-liquid capacity
- Upgraded Z XM Boost Version coils
- Top adjustable airflow
- Leak-resistant top-airflow design
- Convenient top push-to-fill system
- Compatible with Geekvape Z Series coils
- 810 replaceable drip tip
- Enhanced flavour and vapour production
- Coil life of up to 60ml under suitable conditions
- Includes 0.2Ω and 0.4Ω Z XM Boost coils
Geekvape Z Subohm Tank 5 – Enhanced Flavour & Vapour
The Geekvape Z Subohm Tank 5 has been designed to deliver the powerful DTL vaping experience that the Z Tank range is known for, while introducing upgraded Z XM Boost Version coils.
The updated coil technology is designed to improve atomisation efficiency for rich flavour and substantial vapour production. Geekvape states that the upgraded Z XM coils can provide coil life of up to 60ml of e-liquid, although actual coil lifespan will vary depending on wattage, vaping frequency and the type of e-liquid used.
With its high-performance mesh-style coil design and adjustable airflow, the Z Subohm Tank 5 can be fine-tuned to suit your preferred DTL draw.
Top Adjustable Airflow
One of the main features of the Geekvape Zeus Z Subohm Tank 5 is its top-mounted adjustable airflow.
The airflow can be adjusted to change the draw and vaping experience, while the top-airflow configuration is designed to help minimise the risk of e-liquid leaking from the tank.
Whether you prefer a more open DTL draw or a slightly more restricted inhale, the adjustable airflow gives you greater control over your vape.
Convenient Top-Fill Design
Refilling the Geekvape Z Subohm Tank 5 is quick and straightforward thanks to its top push-to-fill system.
The top cap remains attached to the tank, helping to make refilling cleaner and easier without having to completely remove the cap.
To refill, simply slide the top-fill cap to expose the filling port, add your e-liquid and securely close the cap before vaping.
Geekvape Z XM Boost Version Coils
The Z Subohm Tank 5 is compatible with Geekvape Z Series coils, including the upgraded Z XM Boost Version coils.
The UK version comes supplied with Z0.2 XM and Z0.4 XM, and there is also Z0.15 XM coils available:
- Z0.4 XM Boost Version Coil – 0.4Ω – 70-85W
- Z0.2 XM Boost Version Coil – 0.2Ω – 70-80W
- Z0.4 XM Boost Version Coil – 0.4Ω – 50-60W
The 0.2Ω coil is designed for higher-powered DTL vaping and greater vapour production, while the 0.4Ω coil operates at a lower wattage and can provide a slightly more controlled DTL experience.
Always use coils within the manufacturer’s recommended wattage range.
Geekvape Z Subohm Tank 5 Specifications
| Feature | Geekvape Z Subohm Tank 5 |
|---|---|
| Tank Type | Sub-Ohm Tank |
| Vaping Style | DTL |
| E-Liquid Capacity | 2ml TPD |
| Filling Method | Top Push-to-Fill |
| Airflow | Adjustable Top Airflow |
| Drip Tip | 810 Replaceable |
| Compatible Coils | Geekvape Z Series |
| Pre-Installed Coil | Z0.2 XM Boost 0.2Ω |
| Spare Coil | Z0.4 XM Boost 0.4Ω |
| 0.2Ω Coil Range | 70-80W |
| 0.4Ω Coil Range | 50-60W |
| Tank Diameter | 29mm |
| Tank Height | 56.1mm |
What’s in the Box?
- 1 x Geekvape Z Subohm Tank 5 – 2ml TPD
- 1 x Geekvape Z0.2 XM Boost Version Coil – 0.2Ω
- 1 x Geekvape Z0.4 XM Boost Version Coil – 0.4Ω
- 1 x Spare Glass Tube
- 1 x Coil Tool
- 1 x User Instructions
- 1 x Warning & Information Cards
How to Fill the Geekvape Z Subohm Tank 5
- Slide the top cap in the direction indicated to open the fill port.
- Insert your e-liquid bottle nozzle into the filling port.
- Slowly fill the tank, taking care not to overfill.
- Close the top-fill cap securely.
- If you have installed a new coil, allow the tank to stand for around 3-5 minutes so the coil can fully saturate.
- Set your vape mod within the recommended wattage range for the coil before vaping.
Always follow the instructions supplied with your Geekvape Z Subohm Tank 5.
How to Change the Geekvape Z Subohm Tank 5 Coil
The Z Subohm Tank 5 uses replaceable Geekvape Z Series coils, allowing you to replace the coil rather than replacing the entire tank.
You may need to replace the coil when you notice a burnt taste, reduced flavour or reduced vapour production.
- Turn the tank upside down.
- Remove the tank base.
- Use the supplied coil tool if necessary to remove the old coil.
- Install the new Z Series coil.
- Reassemble the tank securely.
- Fill with e-liquid.
- Allow the new coil to saturate for approximately 3-5 minutes.
- Start vaping at the lower end of the recommended wattage range and increase gradually if required.
Which E-Liquid Is Best for the Geekvape Z Subohm Tank 5?
The Geekvape Z Subohm Tank 5 is designed for DTL vaping and its low-resistance coils are best suited to e-liquids formulated for sub-ohm devices.
Higher-VG e-liquids are generally a good choice for sub-ohm tanks because they can produce larger clouds and work well with lower-resistance coils. A 70VG/30PG e-liquid is a popular choice for DTL vaping, although you should always follow the recommendations for your particular coil and device.
Lower-strength nicotine e-liquids are generally more appropriate for high-powered DTL vaping than high-strength nicotine salts.
For the best results, make sure your e-liquid is suitable for the resistance and wattage of the Z Series coil you are using.
How Long Do Geekvape Z Coils Last?
The lifespan of a Geekvape Z XM coil depends on how frequently you vape, the wattage you use, the e-liquid you choose and how well the coil is maintained.
Geekvape states that the upgraded Z XM Boost Version coils can provide up to 60ml of coil life under suitable conditions. This is an indication rather than a guaranteed lifespan, and heavier use or sweetened e-liquids may cause a coil to need replacing sooner.
To help maximise coil life, keep the tank topped up, properly prime new coils and avoid repeatedly vaping when the tank is almost empty.
Geekvape Z Subohm Tank 5 vs Previous Z Sub-Ohm Tanks
The Geekvape Z Subohm Tank 5 builds on the established Zeus Z Sub-Ohm Tank design while introducing upgraded Z XM Boost Version coils.
The main improvements include:
- Upgraded Z XM Boost Version coils
- Enhanced flavour performance
- Up to 60ml stated coil life
- Top push-to-fill design
- Adjustable top airflow
- Leak-resistant airflow configuration
- Continued compatibility with Geekvape Z Series coils
This makes the Z Subohm Tank 5 a strong option for vapers who already use compatible Geekvape Z coils and want the latest generation of the Z Tank design.
Frequently Asked Questions
What is the Geekvape Z Subohm Tank 5?
The Geekvape Z Subohm Tank 5 is a DTL sub-ohm vape tank from Geekvape’s Z, or Zeus, range. It features adjustable top airflow, a top-fill system and upgraded Z XM Boost Version coils.
Is the Geekvape Z Subohm Tank 5 the same as the Zeus Z Sub Ohm Tank 5?
Yes. The product is commonly referred to as the Geekvape Z Subohm Tank 5, Geekvape Zeus Sub Ohm Tank 5 or Geekvape Z Tank 5.
What coils does the Geekvape Z Subohm Tank 5 use?
The Z Subohm Tank 5 uses compatible Geekvape Z Series coils, including the upgraded Z XM Boost Version coils supplied with the tank.
What coil comes with the Geekvape Z Subohm Tank 5?
The UK version comes with a 0.2Ω Z0.2 XM Boost Version coil, rated at 70-80W, plus a 0.4Ω Z0.4 XM Boost Version coil, rated at 50-60W.
Is the Geekvape Z Subohm Tank 5 suitable for DTL vaping?
Yes. The Geekvape Z Subohm Tank 5 is designed specifically for Direct To Lung (DTL) vaping and is intended for use with suitable low-resistance coils and e-liquids.
Does the Geekvape Z Subohm Tank 5 leak?
The tank uses a top adjustable airflow design intended to minimise the risk of e-liquid leakage. Correct filling, coil installation and regular maintenance are still important for reliable performance.
What size is the Geekvape Z Subohm Tank 5?
The Geekvape Z Subohm Tank 5 measures approximately 29mm in diameter and 56.1mm in height, making it suitable for pairing with a wide range of vape mods.
Can I use Geekvape Z coils in the Z Subohm Tank 5?
Yes. The Z Subohm Tank 5 is compatible with Geekvape’s Z Series coil range. Always check the specific coil’s compatibility and recommended wattage before use.
Buy the Geekvape Z Subohm Tank 5 in the UK
The Geekvape Z Subohm Tank 5 is a powerful and versatile DTL tank designed for vapers who want excellent flavour, substantial vapour production and the convenience of top airflow and top filling.
With its upgraded Z XM Boost Version coils, adjustable airflow and easy push-to-fill design, the Geekvape Zeus Z Sub Ohm Tank 5 is a great choice for experienced sub-ohm vapers looking for a dependable replacement tank.
When you buy this vape tank from Vapour Days UK, your order will be dispatched in the same or next working day. Delivery is available to all addresses in the UK. You can also buy these tanks in our Bristol city ceentre shop on the Middle Floor of The Galleries Shopping Centre.
Reviews
There are no reviews yet.