Posted on Leave a comment

iJoy Saber 100 Vape Kit Review

The iJoy Saber 100 20700 Vape Kit mainly consists of the iJoy Saber 100 Mod and the iJoy Diamond Tank. Taken together, these two are striking to look at, and you can choose from ten different designs. Aside from the beautiful design, this kit is a bestseller because its innovative DM coils maximise e-liquid flavour, making vaping a full-blown treat for your tastebuds. 

Wattage ranges from 5 to 100 W, and two glass options offer an e-liquid capacity of either 5.5 or 4 mL. You can also choose between a 20700 or 18650 battery. Shaped like a vape pen while offering full features, the iJoy Saber 100 Vape Kit impresses with each cloud of vapour, and this is a kit that you’ll want to show off to people. 

iJoy Saber Kit Specifications

  • Max Wattage: 100W
  • Compact and portable
  • Bright and Big Screen Size
  • No overhang with 25mm tanks
  • 20700 Batteries Included
  • 18650 Battery Adapter
  • Unique Custom User Mode
  • Resistance Range: 0.05-3.0 ohm
  • Firmware Upgradeable

What’s in the iJoy Saber Kit 

  • 1 x  IJOY SABER 100 Mod
  • 1 x 18650 Adapter
  • 1 x iJoy Diamond Sub Tank
  • 1 x DM-Mesh Coil 0.15ohm (40-90W Pre-installed)
  • 1 x DM-DM Coil 0.15ohm (40-90W)
  • 1 x Replacement Spare Glass
  • 1 x Tool pack
  • 1 x USB Cable
  • 1 x Warranty Card
  • 1 x Gift Box

Design and Build

What is the basic setup of the iJoy Saber 100 Kit?

The iJoy SABER 100 Kit pairs the iJoy Saber 100 Mod with the iJoy Diamond Tank. Long and easy to hold, the iJoy Saber 100 Mod has a standard shape, but because of its additional features, you’ll notice that it’s heavier than your usual vape pen while remaining much more portable than a mechanical mod. The mod has a wide 29-mm diameter, tapering a bit at the top to fit well with the iJoy Diamond Tank, which has a smaller diameter of 25 mm.  

One benefit of the iJoy Saber Kit is that you can use the mod or tank with other components. The iJoy Saber 100 Mod is compatible with other tanks that have the same diameter as the iJoy Diamond Tank or smaller. Taken together, though, the two make a stunning combination. The iJoy Diamond Tank is especially beautiful because of its iridescent glass and delicate carvings. 

Can I choose from several designs?

Both the mod and the tank are available in several colours: Black, SS, Rainbow, Gunmetal, Blue, Red, Purple, Green, Gold, and White.

What are the parts of the iJoy Saber 100 Mod?

As with most tube mods, the iJoy Saber 100 Mod has a minimalist build. It has a firing button near the top and an OLED screen with adjustment buttons on the same side. The bottom of the mod has a detachable cap, which reveals the battery compartment. On the opposite side as the screen, you’ll find a USB port for charging or firmware updating. The mod also houses a 20700 battery along with an IWEPAL chipset.

Controls

The iJoy Saber 100 Mod maintains a frills-free approach by allowing you to change the wattage.

How do I view the settings of the iJoy Saber Mod?

You can check the OLED display screen near the bottom of the mod. It’s conveniently visible regardless of the lighting. Standard settings shown on the screen are the voltage, wattage, resistance, battery life, and puff counter.  

How do I change the settings of the iJoy Saber 100 Mod?

As a variable-wattage mod, its power ranges from 5 W to 100 W with the standard 20700 battery or up to 80 W with an 1850 battery. When you press any of the adjustment buttons above the screen, the wattage changes by 0.1 watt. However, you can press and hold instead for larger changes of 1 W. 

To reset the puff counter, press the firing button three times. 

How do I turn the mod on or off?

Just press the firing button five times. 

What safety protections does the iJoy Saber 100 Mod have?

Since the iJoy Saber 100 Mod has an IWEPAL chip, there are safety protections in place so you can vape comfortably, unlike with typical mechanical mods. It’s programmed with low-power protection, short-circuit protection, and anti-reverse protection for the battery. 

Are there other control features I should know about?

The iJoy Saber 100 Mod has a unique custom user mode, which saves your settings so you don’t have to reconfigure it every time.

Tank

The iJoy Diamond Tank is very striking to look at. Made of stainless steel and pyrex glass, it can hold 5.5 mL of e-liquid with its default bubble glass. That can last you for a while! The bubble glass has an iridescent gleam, subtly showing different colours when it catches the light. There’s also a replacement spare glass in the kit with a smaller capacity of 4 mL.

It comes with an 810 wide bore resin drip tip, and there’s a dual-slotted airflow control ring at the bottom of the tank so you can customise your vape. 

How do I refill the iJoy Diamond Tank?

The iJoy Diamond Tank is a top-fill device, so just turn the cap on top by 180 degrees to unscrew it. You’ll then see a large hole for filling with e-liquid and another one for letting the air out. 

Coils

What coils are included in the iJoy Saber Kit?

The iJoy Saber Kit comes with two coils: a 15-ohm DM-mesh coil (pre-installed) and a 0.15-ohm DM-DM coil. Both coils have a diamond-like shape that also improves the airflow, and these deliver amazing e-liquid flavours while producing massive vapour. 

The 0.15-ohm DM-mesh coil is already pre-installed, with a recommended range of 40 to 90 W. It’s made of 70% flax fibre and 30% wood pulp.

On the other hand, the 0.15-ohm DM-DM coil uses organic cotton for wicking. It’s also rated for the same wattage. 

What’s the technology behind the iJoy Saber Kit’s coils? 

The iJoy Saber Kit delivers excellent vapour and flavour performance, and this is primarily because of the special innovative DM coil system that’s unique to iJoy. These DM coils combine mesh for heating with natural fibre for wicking. There’s more contact between the heating wire and cotton, so wicking is more consistent and heating is faster. The result is intensely good flavour.

Battery

What battery does the iJoy Saber Mod run on?

By default, the iJoy Saber Mod relies on a single 20700 battery to reach up to 100 W, but it can also work with an 18650 battery. 

How do I use an 18650 battery instead?

The iJoy Saber 100 Kit comes with an adaptor for an 18650 battery. However, if you’re sub-ohm vaping, you’ll need more power, so the default 20700 battery is still recommended.

How do I charge the battery?

Charge the battery while it’s inside the mod through the USB port on one side. Alternatively, you can swap batteries or take the battery out and plug it into an external charger. 

Where is the battery compartment?

To access the battery compartment, unscrew the black cap at the bottom of the mod.

Verdict 

Overall, the iJoy Saber 100 Kit performs strongly in terms of flavour and vapour, and don’t even get us started about how beautiful the design is! Thanks to its special DM coils, flavour production is the strongest asset of this top-notch sub-ohm kit, and vapers of all levels will appreciate its variable wattage controls as well as the changeable e-liquid capacity and battery type. 

Fancy a vape pen lookalike with full features? Then the iJoy Saber 100 Kit deserves a top spot in your collection. 

Leave a Reply

Your email address will not be published.